(Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) During initialization, the LED blinks in green.Ĥ) When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. (Do not release the Power button.)ģ) While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. The LED lights in green to indicate that a function is selectable.)Ģ) While holding the Power button, release the Resume/Cancel button. While pressing the Resume/Cancel button, press the Power button. (for MP145 / MP150)Į5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properlyĮ8 = Waste ink absorber full, or platen waste ink absorber fullĮ9 = The connected digital camera / video camera does not support Camera Direct PrintingĮ14 = The Ink cartridges whose destination are wrongĮ15 = Ink cartridge is not installed E16 – Ink remaining is unknownĮ16 -E19 = Failed to scan head alignment sheetĮ27 = Waste ink absorber full or platen waste ink absorber fullĮ28 = Ink cartridge temperature rise error -Į35 15 = USB Host VBUD overcurrent error – USBġ) Close the print head cover, and turn off the printer. Turn off printer dan and take out POWER buttonĥ) Unplug cable power. ON/OFF lamp will change green and oranye.ħ. After printer finish charging, ush STOP/RESET button 4x. Let both of button and printer in to SERVICE MODEĥ. Hold ON/OFF button, press STOP/RESET button 2xģ. Press and Hold STOP/RESET then Push ON/OFF buttonĢ. Turn off power button (power button is in ), These are the step How to Reset waste ink counter (error E16) :ġ. Step 12 : Inksert ink PG 40, PG 41 again (push power button–>start button till 1 page.) Step 5 : Push Power switch again, Printer will be print 1 page Step 4 : Push + display change from 0 to 1 (push button + to change 0 to 1) Step 3 : Push Reset button 1x, Let Power button, Push Reset twice till 0

Step 2 : inserrt plug(Hold and Press Power)

Step 1 : Push Power switch by continue (Push Power On/Off) The method used to is by reset the printerĮrror ink cartridges are not installed properly (error E5) :

Canon pixma pro9000 mark ii error 6a00